D7500 Modbus TCP/IP Ethernet Analog Output Module
$345.00
The D7500 module contains two isolated analog output channels for controlling annunciators, valves of any device that requires an analog input control signal. Each analog output utilizes a 12-bit analog to digital converter that can be programmed to output either a DC voltage or current. There are four user-selectable output ranges: 0-10Vdc, +/-10Vdc, 0-20mA and +/-20mA.
The D7500 contains a user-programmable Initial Value for each channel and a communications Watchdog Timer. The Watchdog Timer can force the analog outputs to a known “safe” condition in the event of a communications failure. The known “safe” condition can be programmed into the Initial Value register. The Initial Value register also specifies the analog output signal for each channel on power-up.
The analog output data values are transmitted to the module in unsigned integer format using the Modbus TCP ethernet protocol.
The D7500 analog output module can be mounted on a DIN-Rail using the MK-1 mounting kit.
Additional information
| Voltage Ranges | 0-10V, +/-10V. |
|---|---|
| Current Ranges | 0-20mA, +/-20mA. |
| Features | • 2CH Analog Output Module. |
| Software | The D7500 analog output modules are compatible with all commercial software programs and OPC servers that support the Modbus TCP/IP ethernet protocol. Commercials software programs from Wonderware, DreamReport, Indusoft, DAQFactory and Dasylab all support the Modbus TCP/IP ethernet protocol. OPC Servers from Kepware and MatrikonOPC support the Modbus TCP/IP ethernet protocol. |
| Applications | • Process monitoring and control |
You may also like…
DASYLab Data Acquisition Software
$0.00 – $1,799.00USB-COMi
$79.00Power Supplies
$26.00MK-1 Mounting Kit
$10.00
